The motorized Power Nozzle utilizes high-speed mechanical agitation to extract dust mites and deep-seated grit from carpets and mattresses. Maintenance ensures maximum agitation efficiency.

Routine Maintenance Checklist

1. Clear Tangled Hair Monthly: Remove the soleplate by turning the locking screws. Use scissors to cut hair along the recessed cleaning groove on the roller, pulling fibers out clean.
2. Clean End Bearing Hubs: Pull hair away from the left and right end caps to prevent friction heat from melting plastic bearing housings.
3. Check Cogged Belt Teeth: Inspect the belt for missing cogs or cracks. Replace annually for optimum carpet beating torque.
4. Reset Switch Protocol: If the red overload button trips on fringe, turn off power, clear the jam, let cool for 2 minutes, then press the red button firmly to reset.